Vehicle Access Control - Sesamo Transit
It is the module for Vehicle Access Control, which allows to set access with the same logic as pedestrian access. As with pedestrian access, the vehicle access points that Sesamo Transit can control are unlimited. All vehicles in transit are monitored and access is only authorized if all the enabling parameters are met. You can decide whether to control the vehicles in both directions or only in one direction. The antennas are connected to special management hardware cards connected to the Ethernet wired network and can have variable range and width, which can be set during installation.
NUMBER PLATE READING
With Sesamo, you can also control passages using ANPR (Automatic Number Plate Reader) cameras. By entering vehicle number plates in the system, it is possible to guarantee the opening of the passage without the need to install devices on board the vehicles.
CAR TAG
The types of Vehicle Access Control are different and depend on the Tags installed on the vehicles:
- CAR TAG - RFID TAG enabled with suction cup, to be applied to the windscreen: the vehicle is automatically recognized on its approach and access is enabled;
- CAR TAG WITH BUTTON - RFID TAG enabled with suction cup and button, to be applied to the windscreen: the vehicle is automatically recognized if the activation button is pressed within range of the antenna, ideal for small parking lots;
- DUAL TAG - RFID TAG enabled with suction cup to be applied to the windscreen: able to transmit both the vehicle code and the driver code. In this case, both vehicle and driver access will be recorded.
