Safety & Security - Software

Vehicle Access Control - Sesamo Transit


 

It is the module for controlling the vehicle accesses, that allows setting the accesses with the same logics of the pedestrian ones. As for the pedestrian accesses, also the points of driveways that Sesamo Transit can control are unlimited.

All the vehicles on transit are monitored and the access is authorised, only if you observe all the enabling parameters. You can decide to control the vehicles in both directions or just in one direction.

The antennas are connected to suitable management hardware cards connected to the cabled Ethernet network and they can have variable range and amplitude that can be adjusted during the installation phase. 

The typologies of vehicle access control are different  and they depend on the Tag installed on the  vehicles:

  • AUTO TAG- active TAG RFID with sucker to be applied on the windscreen: the mean is recognized automatically when approaching and its access  is enabled ;
  • AUTO TAG WITH BUTTON- active TAG RFID with sucker and button, to be applied on the windscreen: the mean is recognized automatically, if in the range of action of the antenna the activation button is pressed, ideal for small parkings;
  • DUAL TAG- active TAG RFID with sucker to be applied on the windscreen, able to transmit both the code of the mean and the one of the driver. In this last case the entrance or exit of the vehicular crossing will be guaranteed, only if the coupling mean + driver will be observed and will comply with all the enabling parameters set  in SESAMO.

Via Poli 40069-Zola Predosa-BOLOGNA 5/b-ITALY
Tel + 39 051 6166900 Fax + 39 051 6187595-
info@indacoproject.com