Sesamo Access Control System integrates Vehicular access devices to existing bars and gates. The Antenna is places on the entrance and allows you to check both incoming and outgoing vehicles, recording each passage in real time. Each vehicle can be supervised through special enabling tables, preventing unauthorized access.

The TAG with suction cup is applied directly on the windshield of the vehicle. There are three different TAGs:

- TAG always active. When the vehicle enters the range of the Antenna (about 10 meters) and if it respects all access rules such a time enabling, the gate will open allowing the passage of the vehicle without stopping.

- TAG with activation on request.  The TAG has a switch button. You must push the button to activate data transmission when you are in the range of the Antenna. Even in this case the entrance activation is allowed only if  access rules are respected. The TAG with switch button is used when the parking area is  near the Antenna. The button pushing activates TAG code transmission only for a while allowing to park even in the range of the Antenna.

- TAG combined vehicle+driver. The combined system allows to check the driver and the vehicle before enabling the entrance or exit from the gate. This working condition allows to make company parking safer avoiding thefts. In fact the driver has a personal badge used for time & attendance or pedestrians access control system (it is necessary 125 KHz or MiFare technology). Inside the car the combined TAG is placed on the windshield using its proper suction. At the entrance near the Antenna the user must approach his pass on the combined TAG, which will send its code (vehicle) and pass code (driver) to the system. Only the verification of both values and compliance enabling tables will allow the gate opening.